Precision-molded electrical insulation, composite sheets, and heavy-duty structural profiles engineered to withstand voltages from 1.1kV up to 33kV.
High-grade Dough Moulding Compound (DMC) conical standoff insulators equipped with precision brass or zinc-plated steel threaded inserts.
| Voltage Rating | 1.1 kV (LT Systems) |
| Material | Thermoset DMC / Polyester Resin |
| Insert Size | M6, M8, M10, M12 Brass |
| Application | LT Switchboards, Busbar Standoff |
| Color / Finish | Red / Brick Brown Gloss |
Vacuum-cast cycloaliphatic epoxy resin insulator offering high creepage distance and tracking resistance for 11kV HT switchgear and disconnectors.
| Voltage Rating | 11 kV (HT Distribution) |
| Creepage Distance | 300 mm minimum |
| Material | Cycloaliphatic Cast Epoxy |
| Cantilever Strength | 4.5 kN to 8 kN |
| Application | HT Switchgear, VCB Panels |
Engineered for medium voltage indoor and outdoor substations, providing superior mechanical bending resistance and impulse voltage withstand.
| Voltage Rating | 22 kV Rated |
| Power Frequency | 50 kV Withstand (1 min) |
| Impulse Voltage | 125 kV Peak (BIL) |
| Material | High-Purity Filled Epoxy Resin |
| Application | Distribution Substations, RMU |
Heavy-duty high voltage insulator manufactured for 33kV switchyard installations, capacitor banks, and main incoming circuit breaker bays.
| Voltage Rating | 33 kV (Max 36 kV) |
| Impulse Withstand | 170 kV BIL |
| Material | Hydrophobic Cast Epoxy |
| Creepage Distance | 900 mm (Heavy Pollution) |
| Application | 33kV Substation Bay, Isolators |
Sheet Moulding Compound (SMC) angle standoffs and cylindrical isolators designed for compact mounting inside motor control and feeder pillars.
| Voltage Rating | 660V - 1.1kV |
| Material | Glass Reinforced SMC |
| Insert Config | M6, M8, M10 Both Ends |
| Flame Rating | UL 94 V-0 Self-Extinguishing |
| Application | PCC / MCC Control Panels |
Specially contoured standoff insulator engineered for transformer core clamping, terminal isolation, and low-loss magnetic flux clearance.
| Capacity / Rating | 12kVA to 25kVA Units |
| Material | Thermal Grade Epoxy Composite |
| Dielectric Loss | Tan Delta < 0.005 |
| Temp Limit | Class F (up to 155°C) |
| Application | Distribution Transformer Core |
High-density fiberglass reinforced polymer sheets offering corrosion immunity, dimensional stability, and high strength-to-weight ratio.
| Thickness | 1.0 mm to 50 mm |
| Resin Type | Isophthalic / Vinyl Ester |
| Sheet Size | 1m x 2m / 4ft x 8ft / Custom |
| Tensile Strength | > 120 MPa |
| Application | Chemical Enclosures, Barriers |
Signature electrical insulation laminates fabricated from woven E-glass cloth bonded with high-performance epoxy resin for switchboard phase barriers.
| Dielectric Strength | > 16 kV/mm |
| Thermal Class | Class F (155°C) |
| Color | Translucent Natural Yellow |
| Thickness Range | 0.5 mm to 40 mm |
| Application | Phase Barriers, Slot Wedges |
NEMA grade continuous woven glass cloth saturated with epoxy resin binder, prized for near-zero moisture absorption and high flexural modulus.
| Water Absorption | < 0.10% (24 hrs) |
| Flexural Strength | > 350 MPa |
| Dielectric Constant | 4.8 @ 1 MHz |
| Operating Temp | 130°C continuous |
| Application | Aerospace, Cryogenics, Circuitry |
Brominated flame retardant epoxy fiberglass laminate engineered for electronic PCB backplanes, high-density terminal boards, and rail coach panels.
| Flammability | UL 94 V-0 Certified |
| Tracking Index | CTI 175V - 600V |
| Surface Resistivity | > 10¹⁴ Ohms |
| Standard Sheets | 1020 x 1220 mm / 1220 x 2440 mm |
| Application | Substation Automation, Rail Panels |
High-density phenolic paper-based and cotton-fabric-based laminates offering clean machineability, wear resistance, and cost-effective LT insulation.
| Base Material | Kraft Paper / Cotton Cloth |
| Resin Matrix | Phenol-Formaldehyde |
| Specific Gravity | 1.35 - 1.40 g/cm³ |
| Color | Dark Brown / Orange / Black |
| Application | Jigs, Fixtures, Switch Baseboards |
UV-stabilized corrugated and flat composite sheets formulated for chemical warehouse roofing, outdoor canopy insulation, and daylight industrial sheds.
| Light Transmission | 50% - 85% (Translucent) |
| UV Resistance | Melinex Film Protected |
| Profile Types | Corrugated, Trapezoidal, Flat |
| Span Length | Up to 6 meters custom cut |
| Application | Chemical Sheds, Substation Roofs |
High-tension composite busbar support blocks designed to brace multiple copper or aluminum runs against devastating 50kA/1-second short-circuit forces.
| Short Circuit Withstand | Up to 65 kA for 1 sec |
| Voltage Class | 1.1 kV to 11 kV |
| Material | Heavy-Duty FRP Machined / Molded |
| Busbar Slots | Custom slotted (Single/Multi-run) |
| Application | PCC Panels, Power Substations |
Machined and molded hexagonal profile supports that prevent rotational twisting during high-torque spanner tightening of busbar joints.
| A/F Dimensions | 25 mm to 65 mm Hex |
| Height Options | 30 mm to 100 mm |
| Insert Thread | M8, M10, M12 Metric Thread |
| Material | Fiberglass Reinforced Polyester |
| Application | Compact Switchgear Busbars |
Modular multi-tier support comb brackets enabling flexible spacing, clean phase separation, and rapid on-site assembly for power panel switchboards.
| Configuration | SP-25, SP-35, SP-50 Series |
| Busbar Width | Accommodates 5mm - 12mm bars |
| Dielectric Rating | Class F Insulation |
| Fastening | Through-bolt or Stud mounting |
| Application | MCC Panels, DG Set Control Desks |
Solid cast epoxy low-voltage transformer bushing with integrated brass or electrolytic copper stem, engineered for 630A continuous full-load rating.
| Voltage / Current | 1.1 kV / 630 Amperes |
| Stem Material | Electrolytic Tough Pitch Copper |
| Insulation Matrix | Vacuum Cast Epoxy Resin |
| Oil Tightness | Hermetically sealed gaskets |
| Application | Distribution Transformers (LV side) |
High-voltage shed bushings for medium-voltage power transformers and vacuum circuit breaker enclosures, delivering superior weatherability.
| Nominal System | 11 kV / Max 12 kV |
| Current Capacity | 250A, 400A, 630A, 1250A |
| Impulse BIL | 75 kV / 95 kV Peak |
| Creepage Sheds | Cycloaliphatic Anti-Pollution Sheds |
| Application | Step-down Substations, VCB Terminals |
Engineered for 33kV primary incoming windings, featuring long creepage shed geometry and internal capacitive stress-grading geometry.
| Voltage Class | 33 kV (Highest 36 kV) |
| Rated Current | 630A to 2000A |
| Lightning Impulse | 170 kV Peak |
| Standard | IS 3347 / IEC 60137 |
| Application | 33kV Power Transformer HV Side |
Precision instrument current transformer cast in high dielectric epoxy resin for indoor metering, differential protection, and energy monitoring.
| Rated Voltage | 11 kV (Indoor Type) |
| Primary Current | 50A up to 1200A |
| Secondary Current | 5A or 1A |
| Accuracy Class | 0.2S, 0.5 (Metering) / 5P10 (Protection) |
| Application | HT Metering Cubicles, VCB Panels |
Filament wound and contact-molded cylindrical fiberglass tanks designed for water treatment, demineralized water storage, and general industrial liquids.
| Capacity Range | 500 Liters to 50,000 Liters |
| Orientation | Vertical or Horizontal Cylindrical |
| Corrosion Barrier | Vinylester C-veil internal liner |
| Service Life | 25+ Years Maintenance-Free |
| Application | RO Plants, ETP / STP, Fire Water |
Heavy-duty dual-laminate (FRP + Thermoplastic lining) tanks engineered for hazardous chemicals including HCl, H2SO4, NaOH, and sodium hypochlorite.
| Liner Options | PP/FRP, PVDF/FRP, PVC/FRP |
| Design Standard | BS 4994 / ASTM D3299 |
| Chemical Resistance | Acids, Alkalis, Pickling Fluids |
| Temp Capability | Up to 110°C dependent on resin |
| Application | Electroplating, Chemical Process Plants |
High-glass-fraction pultruded structural angles used for non-conductive framing, panel corner supports, cable tray walkways, and cooling towers.
| Dimensions | 25x25x3 mm up to 150x150x12 mm |
| Glass Content | > 65% By Weight |
| Conductivity | Electrically Non-Conductive |
| Length | Standard 3m / 6m or cut-to-size |
| Application | Switchyard Fencing, Substation Stairs |
Structural composite channel beams designed to replace heavy steel in corrosive marine, chemical, and high-voltage substation bridge structures.
| Web x Flange | 75x40 mm up to 300x100 mm |
| Resin Grades | Isophthalic / Flame Retardant Vinyl |
| Weight Advantage | 70% Lighter than Steel |
| Corrosion Status | Rust, Salt, Acid Proof |
| Application | Cable Ladder Trays, Support Beams |
Sai Fibertech provides complete tooling, CNC machining, and specialized epoxy casting for bespoke dimensions, non-standard threading, or OEM private labeling.
Request Custom FabricationOur sales dispatch unit in Ghaziabad handles small batch test orders to high-volume containerized industrial shipments.